Lou McLeod: DIY Indoor Vertical Herb Garden

Friday 29 March 2019

DIY Indoor Vertical Herb Garden

DIY Indoor Vertical Herb Garden See more on: Total Survival

This easy DIY turns a few easy-to-find materials into a great indoor vertical herb garden planter. Follow the steps here!

How to Make Your Own Vertical Herb Garden

Vertical Herb Planter for Limited Space

Herb gardens can be a fun and easy step into the world of gardening. Spring has sprung, making many of us feel the urge to garden.

Unfortunately, not everyone has an abundance of outdoor space to garden with.

Our solution to this problem? A space-saving, indoor-friendly, hanging herb garden.

To start your vertical gardening systems, you don't need to go and buy an expensive indoor herb garden kit. This is also a great idea if you'd like to master indoor gardening so that you have fresh herbs no matter the season!

Materials:

Pine Boards 3/4-inch thick
Rope 1/4-inch in diameter
Zip Ties
18 Volt Circular Saw
Cordless Drill
Flower Pots
Hole Saw

Instructions:

Step 1: Cut the Boards

Examine the availability of space in the room for your herb garden then cut the boards to the desired length. You can base the length of the boards on the number of flower pot holes you want.

Step 2: Drill Pilot Holes

With your layout in place, mark them with a pencil then drill small pilot holes through the boards. You can do this with the boards piled vertically so you won't have to drill the holes one board after the other.

Step 3: Drill Holes for the Flower Pots

Before using the hole saw, make sure the boards are clamped securely on the table. Start drilling the flower pot holes evenly spaced out depending on the length of your pine boards.

Step 4: Drill Corner Holes and Sand the Boards

Drill corner holes that are slightly bigger than the diameter of the rope. Sand down the boards using an orbital sander or simply do hand sanding if you don't have one.

What is an orbital sander? A power tool and electricity-powered sander for smooth sanding and stock removal.

Step 5: String the Rope through the Corner Holes

String the rope through the corner holes to connect the pine boards. Create stoppers along the ropes to keep the boards from sliding down – use the zip ties as stoppers.

Your vertical herb garden is now ready! Position the flower pots on each hole and you're all set!

Check out this video from HomeMadeModern for detailed instructions in making this DIY hanging garden:

How's this for an easy vertical herb garden you can make? The instructions are pretty simple, and there's no need for complicated woodworking skills to get it done.

With easy-to-get materials like pine boards, rope, and zip ties, your DIY herb garden is doable using tools you already have.

Think you can manage to make this vertical herb garden on your own? Share your thoughts with us in the comments section below!

UP NEXT:

Editor’s Note: This post was originally published on April 11, 2014, and has been updated for quality and relevancy.

This Article Was First Found at survivallife.com Read The Original Article Here

Check Out The Post Here: DIY Indoor Vertical Herb Garden

Lou McLeod